Dvr Viewer2; Operating Environment; Installing Dvr Viewer2 - Sanyo DSR-5016 Instruction Manual

1

DVR VIEWER2

DVR Viewer2 is a program designed specifically for use with
the digital video recorder. It can be used to play back image
and audio data that have been copied onto storage media
such as a computer hard disk drive or CompactFlash card.
DVR Viewer2 can be downloaded from the Sanyo website at
the URL provided below.
Sanyo website URL:
http://www.sanyosecurity.com
Do not recopy "Viewer2" from a CompactFlash card or disk
for use on a computer.

Operating environment

The following operating environment is required in order to
use the DVR Viewer2.
Applicable operating system: Windows 98 SE, Me, 2000,
XP
CPU: Pentium (R) 4 (2 GHz) or better
Memory: 256 MB minimum
If an older version of DVR Viewer2 or ActiveX is installed,
remove these programs with [Control Panel]
Remove Programs] in advance.
DVR Viewer2 supports JPEG2000.
English

Installing DVR Viewer2

Use the following procedure to install DVR Viewer2.
1
Decompress the downloaded DVR
Viewer2 and double-click the installer
icon.
The installation wizard starts.
2
The setup wizard is displayed. Perform
operations following the messages
displayed on the screen.
[Add or
205