Detecting Connected Cameras - Sanyo DSR-5016 Instruction Manual

1 INITIAL SET
5
Turn the jog dial to select "ADJUST.
TIME" under <EXT. CLOCK SET> and
then turn the shuttle dial clockwise.
"01" flashes.
The default setting is "01:00".
6
Turn the jog dial to select the time and
then turn the shuttle dial clockwise.
Example: Set to 05:00.
7
Press the [EXIT/OSD] button.
The setting procedure for the first digital video recorder is
ended and the display returns to the normal screen.
EXIT/OSD
8
Use the same procedure to set the time
on the second recorder.
Set the time to the same time of the first digital video
recorder.
When using the CLOCK OUT/IN terminals to set the time,
use the same power source for each DVR unit. When
turning the power off, do so for all devices at the same
time. Otherwise, times will be out of sync.
The minutes and seconds cannot be set for "ADJUST.
TIME".
<LANGUAGE/LANGUE/IDIOMA>
ENGLISH
<CLOCK SET>
01-01-2005 SAT 00:00:00
<DAYLIGHT SAVING>
MODE : USE
WEEK MONTH TIME
ON 1ST-SUN 04 02:00
OFF LST-SUN 10 02:00
<EXT.CLOCK SET>
ADJUST. TIME 01:00
<LANGUAGE/LANGUE/IDIOMA>
ENGLISH
<CLOCK SET>
01-01-2005 SAT 00:00:00
<DAYLIGHT SAVING>
MODE : USE
WEEK MONTH TIME
ON 1ST-SUN 04 02:00
OFF LST-SUN 10 02:00
<EXT.CLOCK SET>
ADJUST. TIME 05:00
64

Detecting connected cameras

Automatically detect connected cameras and adjust the
following settings depending on the presence or absence of
cameras.
Program record set ( P.85)
All settings for programs No. 1-4 are set to "1FPS" for
channels with cameras connected and "OFF" for channels
with no cameras connected.
Automatic screen selection time period and monitor
settings ( P.128)
All settings for time periods T1-4 are set to "1S" for
channels with cameras connected and "OFF" for channels
with no cameras connected.
Setting masks ( P.130)
All settings for time period T1 - 4 including main monitor,
monitor 2, and network are set to "OFF" for each channel.
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
MENU
2
Turn the jog dial to select "1.INITIAL
SET" and then turn the shuttle dial
clockwise.
The <INITIAL SET> screen is displayed.
3
Turn the jog dial to select "2.CAMERA
DETECT" and then turn the shuttle dial
clockwise.
The <WARNING> screen is displayed.
<WARNING>
CAMERA DETECT
CONTINUE?
NO
English