Sanyo DSR-5016 Instruction Manual page 142

8 ADVANCED MENU SET
13
Turn the shuttle dial clockwise.
The <ROI (AREA/SENSITIVITY)> screen is displayed.
When "QUALITY" are all set to "OFF", the <AREA/
SENSITIVITY> screen is not displayed.
The frame is not displayed for "STATIC AREA" numbers
with "QUALITY" set to "OFF".
When only "QUALITY" is set for "STATIC AREA", "CH-01"
appears in the bottom of the screen. Set the area for ROI.
( P.142)
14
Turn the jog dial to select "T-1" and
then turn the shuttle dial clockwise.
"T-1" flashes.
[Settings] ( indicates default setting)
Setting
T-1 Time period T-1
T-2 Time period T-2
T-3 Time period T-3
T-4 Time period T-4
"T-1" through "T-4" are the times of TIME PERIOD A or
TIME PERIOD B set on the <TIME PERIOD SET> screen.
( P.69)
English
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
Description
15
Turn the jog dial to select the time
period and then turn the shuttle dial
clockwise.
The cursor moves to "LEVEL".
16
Turn the shuttle dial clockwise.
"OFF" flashes.
17
Turn the jog dial to select the response
sensitivity and then turn the shuttle dial
clockwise.
While responding, a beep sounds and the area number is
highlighted.
The cursor moves to "TIME LAG".
[Settings] ( indicates default setting)
Setting
OFF Response sensitivity is disabled.
Response sensitivity is enabled. Lower
1 - 10 numbers correspond to higher levels of
sensitivity.
Set "TIME LAG" to OFF when "LEVEL" is set.
141
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
Description