Table of Contents
Advertisement
4. RECORDING AREA SET
The hard disk in this unit consists of three independent recording areas, each of which has
five recording modes.
Firstly, a percentage of the total capacity is allocated to each recording area (settings are in
units of 1%).
Recording area
NORMAL
Normal recording
RECORDING
Timer recording
AREA
ALARM
Alarm recording
RECORDING
AREA
Pre-alarm
recording
ARCHIVE AREA
Copy
1
Total capacity display
Displays the total capacity of the hard disk.
2
Capacity display for each recording area
The recording capacity of each recording area established
in this unit is displayed as a percentage of total capacity.
Recording area capacity cannot be set or
changed from the computer side.
3
Recording area reset
If OVERWRITE setting is OFF, recording will stop
automatically when each recording area becomes full but
when [AREA FULL RESET] is clicked, whatever has been
recorded so far is deleted and recording will begin from the
start of the recording area.
Recording mode
Manual
Automatic
Automatic
Automatic
Manual
12
Menu Setting Procedures
Notes
Recording is done manually with the O button.
Recording is done automatically within a time range
specified by setting timer recording on the menu
screen.
By specifying alarm recording with the menu screen,
recording is done automatically when an alarm has
been detected.
By specifying pre-alarm recording with the menu
screen, the image nearest the alarm entry is
recorded automatically.
This is used as a function complementary to alarm
recording.
Copies and saves essential recordings from another
recording area by operating the M button
manually.
1
2
3
English
Advertisement
Table of Contents
