Sanyo DSR-5016 Instruction Manual page 70

1 INITIAL SET
Timer period settings
Example 1: Setting periods using TIME PERIOD A and
TIME PERIOD B
TIME PERIOD A
T-1=6:00
T-2=11:30
T-3=13:30
T-4=18:00
TIME PERIOD B
T-1=6:00
T-2=8:00
T-3=14:30
T-4=20:00
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
MENU
2
Turn the jog dial to select "1.INITIAL
SET" and then turn the shuttle dial
clockwise.
The <INITIAL SET> screen is displayed.
3
Turn the jog dial to select "5.TIME
PERIOD SET" and then turn the shuttle
dial clockwise.
The <TIME PERIOD SET> screen is displayed.
For both TIME PERIOD A and TIME PERIOD B, all settings
are "00:00" by default setting.
English
<TIME PERIOD SET>
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 00:00 00:00 00:00 00:00
SELECT TIME PERIOD
SEQUENCE TIME PERIOD A
MASK TIME PERIOD A
MOTION/ROI SENSOR TIME PERIOD A
<TIME PERIOD SET>
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 00:00 00:00 00:00 00:00
SELECT TIME PERIOD
SEQUENCE TIME PERIOD A
MASK TIME PERIOD A
MOTION/ROI SENSOR TIME PERIOD A
4
Turn the jog dial to select "TIME
PERIOD A" and then turn the shuttle
dial clockwise.
"00:" for T-1 flashes (indicating the hour).
5
Set the time for T-1.
(1) Turn the jog dial to select "06" and then turn the shuttle
dial clockwise.
":00" for T-1 flashes (indicating the minutes).
(2) Turn the shuttle dial clockwise.
"00:" for T-2 flashes (indicating the hour).
6
Set the time for T-2.
(1) Turn the jog dial to select "11" and then turn the shuttle
dial clockwise.
":00" for T-2 flashes (indicating the minutes).
(2) Turn the jog dial to select "30" and then turn the shuttle
dial clockwise.
"00:" for T-3 flashes (indicating the hour).
7
Use the same procedure to set the hour
and minutes for T-3 and T-4.
8
Use the same procedure to set the hour
and minutes for T-1 to T-4 in TIME
PERIOD B.
Settings for T-1 through T-4 cannot be made in such a way
that they extend over two days (i.e., include midnight). If
"00:00" (midnight) must be set, this should be done using
T-1.
Any setting of "00:00" for T-2 through T-4 is skipped.
Example: T-1
06:00 12:00
In the above example, T-4 (00:00) is skipped and T-3
operates between 18:00 and 06:00.
Furthermore, when T-1 through T-4 are all set to "00:00",
all but T-1 are ignored and T-1 operates from midnight to
midnight the next day.
69
<TIME PERIOD SET>
TIME PERIOD T-1 T-2 T-3
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 00:00 00:00 00:00 00:00
SELECT TIME PERIOD
<TIME PERIOD SET>
TIME PERIOD T-1 T-2 T-3
TIME PERIOD A 06:00 11:00 00:00 00:00
TIME PERIOD B 00:00 00:00 00:00 00:00
T-2 T-3 T-4
18:00 00:00
[KEY]
T-4
[KEY]
T-4