Disconnecting; Messages Displayed When Connected - Sanyo DSR-5016 Instruction Manual

2 NETWORK CONTROL
When the maximum number of PCs (15) is connected to
the digital video recorder and then an upper-level user
accesses the unit from a different PC, the most recent
lower-level user is automatically disconnected and priority
is given to the upper-level user.
An error message is displayed on the PC of the
disconnected user. ( P.158)
If entry of an incorrect password is repeated or [Cancel] is
clicked, [AUTHENTICATION ERROR] displayed.
If a user clicks a restricted button during computer control,
the password input screen is displayed to verify the
required user level.
4
Select a language and click [OK].
The operation screen is displayed and computer control is
now enabled.
A connection may not be possible via a proxy server. In
this case, cancel the proxy settings.
Due to certain PC performance levels and specifications, a
portion of the video may not be displayed. In this case, go
to [Tools] [Internet Options]
[Settings] in Internet Explorer, and then reduce [Amount
of disk space to use].
English
[Temporary Internet Files]
157

Disconnecting

1
Click the button on the operation
screen of the PC.
The connection is cancelled and control rights are returned to
the unit.
To forcibly cancel PC access from the unit, press and hold
the [SHUTTLE HOLD] button for at least 3 seconds.
Access from the PC is not permitted for a period of 10
seconds after access is cancelled.
The access connection is also cancelled and control rights
then switch back to the unit whenever communication with
the PC is not possible for a period of about 1 minute or
more.
If the browser is closed without clicking the
approximately 1 minute is required before reconnection is
possible.

Messages displayed when connected

Messages related to the switching of control or the network
connection status may be displayed on-screen at any time.
Display on the unit
When control rights are switched to the PC
"NETWORK CONTROL" is displayed on the monitor.
The "NETWORK CONTROL" message is displayed when
connected to a network, regardless of whether control is
performed from the PC or the digital video recorder
01-01-05 00:00:00 REC REPEAT EN A ALARM 0000000
NETWORK CONTROL NETWORK CONTROL NETWORK CONTROL
02
The "NETWORK CONTROL" message is not displayed
when the network control setting ( P.123) connection
display is set to "OFF" using the unit's setting menu.
button,