Sanyo DSR-5016 Instruction Manual page 166

2 WATCHING IMAGES
Live mode image (multi-screen display)
(6)
NORMAL RECORDING MODE STOP
LIVE
(7)
01-01-05 00: 37: 58
01
04
07
READ INTERVAL : 1
(1)
Adjusting the image and audio
Use the following procedures to adjust the images displayed
on screen.
To make an adjustment, select the adjustment setting from
the menu and then click [SET] from the pull-down menu on
the screen.
(1) READ INTERVAL (Default setting: 1)
Select one of five image display speeds.
Larger setting numbers correspond to higher speeds;
however, the actual speed depends on the speed of your
network connection.
* When "(4) AUDIO" is set to "ON", "READ INTERVAL"
cannot be set.
(2) SIZE (Default setting: 1)
Select one of six image sizes.
Larger setting numbers correspond to larger image sizes.
[Settings] ( indicates default setting)
x
1 320 240
x
2 400 300
x
3 640 480
* Size for full screen monitoring.
(3) QUALITY (Default setting: 3)
Four levels of picture quality can be set for live images (live
mode only).
The recorded image is not displayed during playback.
[Settings] ( indicates default setting)
1 Lowest quality
2 Standard quality
3 Fine
4 Best quality
English
(8) (9) (10)
STOP
ALARM RECORDING MODE
USER ID ID4 LV1:0 LV2:0 LV3:0 LV4:1
02 HALL 4F 03
05 06
08 09
SET
SIZE : 1 QUALITY : 3
(2) (3)
x
4 800 600
x
5 1,024 768
6 1,280 x 960
Play mode image (full-screen display)
(6) (11)
NORMAL RECORDING MODE
PLAY
ALARM RECORDING MODE ALARM RECORDING MODE
(7)
01-01-05 00: 36: 20 PLAYBACK AREA
01
(1)
READ INTERVAL : 1 SIZE : 1
AUDIO : OFF ----
(4)
(4) AUDIO (Default setting: OFF)
Change the audio channel for the device connected to the
AUDIO1 IN terminal on the unit's rear cover.
Listen to the current audio from the device connected to the
AUDIO1 IN terminal while displaying live image.
Play audio from the device connected to the AUDIO1 IN
terminal at the time of recording while playing back a recorded
image.
[Settings] ( indicates default setting)
Setting
OFF Audio is not played.
Play audio from the device connected to
A1 the AUDIO1 IN terminal on the unit's rear
cover.
Play audio from the device connected to
A2 the AUDIO2 IN terminal on the unit's rear
cover.
Play audio from both the AUDIO1 IN
A12 terminal and the AUDIO2 IN terminal on
the unit's rear cover.
Select the audio delay time (buffering time).
Audio data is loaded to the computer (buffered) for a given
amount of time to ensure that there are no playback
interruptions. The playback audio is delayed when compared
with the originally recorded sound. The following set amounts
of time indicate the delay.
[Settings] ( indicates default setting)
Setting
5SEC Set the audio delay (5, 10, 15, 20 or 30
seconds) to play audio.
10SEC
In Play mode, the speed of fast-forward
15SEC
and frame advance may be affected by
20SEC
the network environment being used.
30SEC
In addition, if the audio-data reading
screen appears frequently, the audio
Screen indicating
delay (5, 10, 15, 20 or 30 seconds)
the reading of
should be lengthened to match the
audio data
network environment.
If this screen continues to appear
frequently even when the delay time is 30
seconds, it indicates that audio playback
is not possible with the network
environment being used.
165
(8) (9) (12)
STOP
STOP
NORMAL SPEED PLAY
OFF SET
SAVE TO PC :
(2) (5)
Description
Description