Table of Contents
Advertisement
3
RECORDING
POWER indicator
Normal recording
Use the following procedure to record the monitored video
in the normal recording area.
1
Press the [REC/STOP] button.
The REC/STOP indicator lights up, "REC" appears on-
screen (i.e., the recording symbol), and recording starts.
REC/STOP
When recording for the first time, the default settings
are used. For details regarding modification of the
picture quality or recording rate, see INSTRUCTION
MANUAL.
When the space remaining in the normal recording area
drops below a preset value, recording will stop, and the
FULL indicator will remain lit. Modification of the
<RECORD SET> allows recording to start again from
the beginning. (See INSTRUCTION MANUAL.)
Ending normal recording
2
Press and hold the [REC/STOP] button
for approximately 3 seconds.
"REC" disappears from the operation display and
recording ends.
REC/STOP
Be sure to set the time before recording. The digital
video recorder needs setting the time for recording.
English
[REC/STOP] button
Recording symbol
0
01-01-04 00:00:00 REC REPEAT EN A ALARM 0000
02
[EXIT] button
[TIMER] button
Timer recording
Use the following procedure to record the monitored video
for a preset length of time in the normal recording area.
1
Press the [TIMER] button.
The TIMER indicator lights up and the digital video
recorder enters timer recording standby mode.
TIMER
(1) See INSTRUCTION MANUAL for more details on
timer recording settings.
(2) At the time specified for the start of timer recording, the
REC/STOP indicator lights up, "REC" appears on-
screen (i.e., the recording symbol), and recording starts.
(3) At the time specified for the end of timer recording, the
TIMER and REC/STOP indicators turn off, and
recording ends.
When the space remaining in the normal recording area
drops below a preset value, recording will stop, and the
FULL indicator will remain lit. Modification of the
<RECORD SET> allows recording to start again from
the beginning. (See INSTRUCTION MANUAL.)
Playback is possible even while recording. See
INSTRUCTION MANUAL for more details.
If timer recording is not set, the button operation is not
adopted and a buzzer is sounded.
Stopping timer recording before completion
2
Press the [TIMER] button.
The TIMER indicator turns off and recording ends.
TIMER
7
0
01-01-04 00:00:00 REC REPEAT EN A ALARM 0000
02
Advertisement
Table of Contents
