Names And Functions Of Parts; Front Panel - Sanyo DSR-5016 Instruction Manual

2

NAMES AND FUNCTIONS OF PARTS

1 2
POWER FULL
1
6
AUDIO
OUT
7
9
USB
8

Front panel

1. POWER indicator
Lights up when the power is on.
2. FULL indicator ( P.81)
Flashes when the amount of available memory in the hard
disk's recording area drops to the percentage specified using
menu settings.
In addition, recording stops automatically when no more
memory is available, and the FULL indicator switches to a
permanently lit condition.
The indicator can then be turned off by performing "AREA
FULL RESET".
3. ERROR indicator ( P.17)
This indicator flashes if the HDD or fan begins to malfunction.
4. LOCK indicator ( P.113)
Lights up when operations have been locked.
The LOCK indicator turns off when the lock condition is
cancelled.
5. ALARM indicator
Flashes during alarm recording.
The ALARM indicator lights up during pre-alarm recording.
6. AUDIO OUT (RCA) terminal
Connect this terminal and VIDEO OUT terminal to a
commercially-available VCR or DVD recorder to enable
copying of recorded audio and video. (Same as the audio
output terminal on the rear panel)
7. VIDEO OUT (RCA) terminal
Connects to a commercially-available VCR or DVD recorder
to enable copying of recorded video. (Same as the MAIN
MONITOR output terminal on the rear panel)
8. USB terminal ( P.54)
Connects to a recordable CD or DVD drive.
For compatibility, refer to the SANYO homepage.
http://www.sanyosecurity.com/
The rear panel and front panel USB terminals cannot be
connected to simultaneously.
English
3 4 5
ERROR LOCK ALARM
2 3 4 5 6 7 8
10 11 12 13 14 15 16
9
12 11 16
13 19
MENU EXIT/OSD
MENU
ZOOM SEARCH
FUNC.
QUAD MULTI
SEQUENCE
PRESET AUTO PAN
AUDIO MON 2 PLUS
REC/STOP
SEQUENCE TOUR
22
10 14 15 25
9. [CAMERA SELECT] buttons and indicators
When one or more cameras have been connected to the
VIDEO IN terminals on the digital video recorder's rear panel
and the appropriate [CAMERA SELECT] button is pressed,
the corresponding indicator lights up and the video feed from
that camera is displayed on-screen.
During quad, multi 9, or multi 16 screen display:
The indicators corresponding to the cameras being
displayed on the monitor light up.
During video loss:
The indicator starts to flash.
If an alarm occurs:
The indicator for the corresponding camera starts to flash.
10. [AUDIO] button
Audio input channels connected to the rear panel AUDIO IN
terminal can be switched.
Each time this button is pressed, the channel changes in the
following order: 1+2, OFF, 1, 2.
11. [FUNC.] button
Activates dome camera operation mode. The operation of
other buttons changes. ( P.145) Use also for advanced
menu functions.
12. [QUAD] button and indicator ( P.23)
Displays video in quad screens. The indicator lights up while
in quad screen display.
The indicator turns off when using a different screen display
mode.
13. [MULTI] button and indicator ( P.24)
Displays video in multi 9 or multi 16 screen display.
The indicator lights up while in multi 9 or multi 16 screen
display.
The indicator turns off when using a different screen display
mode.
14. [MON2] button and indicator ( P.26)
If the [MON2] button is pressed while a monitor is connected
to the MON2 output terminal on the rear panel, it is possible to
change the monitor 2 video. The [CAMERA SELECT],
[SEQUENCE], [QUAD], [MULTI] and [PLUS] buttons can be
used. The indicator lights up when this mode is selected.
15. [PLUS] button ( P.24)
Changes the video from a single camera to quad screen size
during multi 9, multi 16, full screen or quad screen display.
16. [MENU] button and indicator
Displays the menu screens (i.e., setting screens), and the
indicator lights up while any of these screens is being
displayed.
9
17 18 28
20 21
SHUTTLE
PLAY/STOP
JOG
ENTER AF
STILL
IRIS
COPY SHUTTLE HOLD
FOCUS
TIMER ALARM
MENU
RESET
EJECT
PAN
ZOOM/I/FO
23
26 27 24
29
CARD CARD
30