External Clock Setting - Sanyo DSR-5016 Instruction Manual

1 INITIAL SET
7
Set the date and time.
Example: Set the daylight saving time to begin at
April 3, 2005, 02:00.
Set the daylight saving time to end
October 30, 2005, 02:00.
The clock display jumps forward one hour from April 3, 2005,
01:59 to 03:00.
The clock display jumps back one hour from October 30,
2005, 01:59 to 01:00.
(1)
WEEK
ON 1ST-SUN
OFF LST-SUN
(5)
Daylight saving time begins
(1) Week, (2) Day of the week, (3) Month, (4) Time
Daylight saving time ends
(5) Week, (6) Day of the week, (7) Month, (8) Time
(1) Turn the shuttle dial clockwise.
"1ST" for "ON" flashes.
(2) Turn the jog dial to select the week daylight saving time
begins and then turn the shuttle dial clockwise.
The cursor moves to "SUN" for "ON".
(3) Turn the jog dial to select the day of the week daylight
saving time begins and then turn the shuttle dial
clockwise.
The cursor moves to "04".
(4) Turn the jog dial to select the month daylight saving time
begins and then turn the shuttle dial clockwise.
The cursor moves to "02".
(5) Turn the jog dial to select the hour daylight saving time
begins and then turn the shuttle dial clockwise.
The cursor moves to "00".
(6) Turn the jog dial to select the minute daylight saving time
begins and then turn the shuttle dial clockwise.
The cursor moves to the end date and time.
(7) Use the same procedure to set the date and time daylight
saving time ends.
8
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
EXIT/OSD
English
(2) (3) (4)
MONTH TIME
04 02:00
10 02:00
(6) (7) (8)

External clock setting

Use the following procedure to align the time of all digital
video recorders daily when multiple recorders are connected.
(Default setting: 01:00)
At the set time, all connected recorders are aligned to the
same time to a precision of seconds.
1
Connect the CLOCK OUT terminal on
the rear of the first digital video
recorder to the CLOCK IN of the second
recorder.
CLOCK OUT CLOCK IN
C
2
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
MENU
3
Turn the jog dial to select "1.INITIAL
SET" and then turn the shuttle dial
clockwise.
The <INITIAL SET> screen is displayed.
4
Turn the jog dial to select
"1.LANGUAGE/CLOCK SET" and then
turn the shuttle dial clockwise.
The <LANGUAGE/LANGUE/IDIOMA> screen is displayed.
63
CLOCK OUT
C C
To C terminal
To CLOCK IN
terminal
<LANGUAGE/LANGUE/IDIOMA>
ENGLISH
<CLOCK SET>
01-01-2005 SAT 00:00:00
<DAYLIGHT SAVING>
MODE : USE
WEEK MONTH TIME
ON 1ST-SUN 04 02:00
OFF LST-SUN 10 02:00
<EXT.CLOCK SET>
ADJUST. TIME 01:00