Viewing On Monitor 2 - Sanyo DSR-5016 Instruction Manual

2 MONITORING VIDEO FROM A CAMERA

Viewing on monitor 2

When a monitor is connected to the MON2 output terminal on
the rear panel of the digital video recorder, this monitor can be
used to view video in quad screen or multi screen format or
automatically scroll through video from all cameras
independent of the display on the main monitor. In addition, it
is also possible to display video on monitor 2 automatically
from any camera for which an alarm has occurred. By default,
automatic full screen selection is performed.
Use the [MON2] button to change the monitor 2 setting.
The playback image cannot be viewed on Monitor 2.
1
Press the [MON2] button.
The MON2 indicator lights up.
MON2
[MON2] button
Monitor 2 is not available while a menu screen is being
displayed, search menu is being operated or camera is
being controlled.
Viewing on a full screen
Example: Selecting Camera 4
2
Press the No. 4 [CAMERA SELECT]
button.
The video from Camera No. 4 is displayed in full screen on
monitor 2.
Monitor 2
01-01-05 00:00:00
04
Viewing on a quad screen
2
The video from cameras No. 1 through 4 is displayed in quad
screen on monitor 2.
3
Each time this button is pressed, the four images on the quad
screen change, in order of cameras No. 1-4, 5-8, 9-12 and 13-
16.
4
Main monitor
03
01
06
07 08 09
26
Press the [QUAD] button.
Monitor 2
01-01-05 00:00:00
04
QUAD
02
01
04
03
To view video from another camera,
press the [QUAD] button again.
QUAD
To return to full screen display, press a
[CAMERA SELECT] button.
-
Main monitor
03
01
06
07 08 09
05 06
07 08
English