Sanyo DSR-5016 Instruction Manual page 144

8 ADVANCED MENU SET
5
Turn the shuttle dial clockwise.
Area settings mode is activated and an icon appears in the
upper right part of the screen.
6
Turn the jog dial to move the cursor (the
orange ) to the upper left of the
position where an area is to be set and
then turn the shuttle dial clockwise.
The cursor moves to the bottom right.
FUNC.
Turn the jog dial to move the cursor to the left or right.
Press the [FUNC.] button and turn the jog dial to move the
cursor up or down.
7
Turn the jog dial to move the cursor (the
orange ) to the lower right of the
position where an area is to be set and
then turn the shuttle dial clockwise.
The cursor (the orange
FUNC.
Turn the jog dial to move the cursor to the left or right.
Press the [FUNC.] button and turn the jog dial to move the
cursor up or down.
English
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
2
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
) moves to the top left of frame 2.
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF
8
Set the areas in frame 2 and frame 3 in
the same way.
The cursor moves to "T-1".
Icon
Turn the shuttle dial counter-clockwise to return to the
previous operation.
9
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
EXIT/OSD
If areas coincide, the smaller area number is prioritized.
Large ROI size decreases ROI effectiveness.
143
2
1
3
CH-01 T-1 LEVEL: OFF TIME LAG: OFF