Sanyo DSR-5016 Instruction Manual page 96

2 RECORD SET
11
Turn the jog dial to select "SW" or
"ONLY" and then turn the shuttle dial
clockwise.
The cursor moves to "REC RATE".
[Settings] ( indicates default setting)
Setting
Recording is switched between video from a
SW camera for which an alarm has occurred and
video from all connected cameras.
Video is recorded only from cameras with an
ONLY
alarm occurring.
* Example of recording pattern for SW and ONLY
SW
Alarm
01 02 03 02 04 02
Alternate recording of multiple alarm recordings
ONLY
Alarm
01 02 03 02 02 02
Recording until alarm is cancelled
12
Turn the shuttle dial clockwise.
"A15" flashes.
(Default setting: 15FPS)
English
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE: A15FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->
Description
Alarm
05 04 06 02 07 04 08 02
Alarm is cancelled
02 02 04
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE: A15FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->
13
Turn the jog dial to select the "REC
RATE" setting and then turn the shuttle
dial clockwise.
The cursor moves to "DURATION".
[Settings] ( indicates default setting)
Setting
60, 30, 20, 15, 10, 7.5,
6, 5, 4.286, 3.75, 3.333,
3, 2.727, 2.308, 2, 1.667,
1.429, 1.25, 1.111, 1, 0.5,
0.333, 0.25, 0.2, 0.1,
0.05, 0.033
When only one camera is connected, recording is
performed at 30 FPS even if 60 FPS is set.
When two or more cameras are connected and 60 FPS is
set, the actual recording rate is roughly the recording rate
divided by the number of cameras. (Example: When 6
cameras are connected and the recording rate setting is 60
FPS, the actual recording rate is 10 FPS)
14
Turn the shuttle dial clockwise.
"20SEC" flashes.
95
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE: A15FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->
Description
Recording is performed at the
selected recording rate (unit: FPS).
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
PICTURE QUALITY SET ->
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE: A15FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ***
REC RATE: ***** FPS, DURATION: *****
ALARM TRIGGER : ALARM
MOTION SENSOR ->