Setting Overwrite Permission - Sanyo DSR-5016 Instruction Manual

2 RECORD SET
7
Turn the shuttle dial clockwise.
After the hard disk is initialized, the <RECORD SET> screen
appears and the new recording capacity setting is applied.
8
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
EXIT/OSD

Setting overwrite permission

When "OVERWRITE" is set to "OFF" for recording conditions
and the recording areas become full, recording is
automatically stopped. In this case, overwrite permission can
be used to overwrite previous recordings.
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
MENU
2
Turn the jog dial to select "2.RECORD
SET" and then turn the shuttle dial
clockwise.
The <RECORD SET> screen is displayed.
English
3
The <RECORDING AREA SET> screen is displayed.
HDD INITIALIZING !
4
The <WARNING> screen is displayed.
To perform "AREA FULL RESET" for the archive area, select
"AREA FULL RESET" under "ARCHIVE AREA".
5
Recordings can now be made to the recording area.
6
The setting is completed and the display returns to the normal
screen.
79
Turn the jog dial to select
"2.RECORDING AREA SET" and then
turn the shuttle dial clockwise.
TOTAL CAPACITY
RECORDING AREA
ARCHIVE AREA
CAUTION: WHEN THE AREA SETTING IS CHANGED,
Turn the jog dial to select "AREA FULL
RESET" under "RECORDING AREA"
and then turn the shuttle dial clockwise.
Turn the jog dial to select "YES" and
then turn the shuttle dial clockwise.
TOTAL CAPACITY
RECORDING AREA
ARCHIVE AREA
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
Press the [EXIT/OSD] button.
EXIT/OSD
<RECORDING AREA SET>
: 1200GB
INTERNAL HDD : 500GB
EXTERNAL HDD : 700GB
: 80 %
AREA FULL RESET ->
: 20 %
AREA FULL RESET ->
THE WHOLE AREA WILL BE INITIALIZED !
<WARNING>
AREA FULL RESET
ARCHIVE AREA
ARE YOU SURE ?
NO
MOVE:JOG SELECT:SHUTTLE
<RECORDING AREA SET>
: 1200GB
INTERNAL HDD : 500GB
EXTERNAL HDD : 700GB
: 80%
AREA FULL RESET ->
: 20%
AREA FULL RESET ->