Sanyo DSR-5016 Instruction Manual page 49

5 SEARCHING FOR RECORDED VIDEO
6
Turn the jog dial to select "PREVIEW".
7
Turn the shuttle dial clockwise.
Each time the shuttle dial is turned clockwise, a different
motion sensor screen is displayed on the preview screen.
If "NOT FOUND!" is displayed
Set the motion sensor again.
Viewing video detected by the motion sensor
8
Turn the jog dial to select "VIEW" and
then turn the shuttle dial clockwise.
Normal playback begins for the specified recording.
If "- -" is specified for "CHANNEL", the videos are displayed
on the multi 16 screen. If "01" to "16" is specified for
"CHANNEL", playback can be performed for only the
specified camera number.
In such a case, the title information, date information and/
or time information may not be displayed completely.
To playback a recording from a different camera, stop the
current playback and then repeat the setting process from
the beginning.
< MOTION DETECTION SEARCH >
SEARCH FROM : NORMAL / CHANNEL : --
START :
09-12-03 10:00
END :
09-12-03 20:00
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE
< MOTION DETECTION SEARCH >
SEARCH FROM : ALARM / CHANNEL : --
START :
09-12-03 10:00
END :
09-12-03 20:00
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE
48
English