Sanyo DSR-M800 Instruction Manual
Sanyo DSR-M800 Instruction Manual

Sanyo DSR-M800 Instruction Manual

Sanyo instruction manual digital video recorder dsr-m800
Table of Contents

Advertisement

e_dsr_m800.book Page 0 Friday, January 31, 2003 5:45 PM

Digital Video Recorder

Instruction manual
Manuel D'instructions
Manuel de Instrucciones
About this manual
Before installing and using this unit, please read
this manual carefully. Be sure to keep it handy for
later reference.
À propos de ce manuel
Avant d'installer et d'utiliser cet appareil, veuillez lire ce
manuel attentivement. Assurez-vous de le garder à
portée de la main pour référence ultérieure.
Acerca de este manual
Antes de instalar y usar este aparato, lea detenidamente
este manual. Asegúrese de guardarlo a mano para
futuras referencias.
POWER
SEARCH
TIMER
MENU RESET
FULL
LAN
(LINK/ACT.)
PLAY/
STOP
MENU
REVIEW
CUE
EXIT/OSD
STILL
USB
ALARM
REC/STOP
LOCK/REMOTE
English
GB
F
E

Advertisement

Table of Contents
loading

Summary of Contents for Sanyo DSR-M800

  • Page 1: Digital Video Recorder

    e_dsr_m800.book Page 0 Friday, January 31, 2003 5:45 PM Digital Video Recorder Instruction manual Manuel D'instructions Manuel de Instrucciones About this manual Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference.
  • Page 2: Declaration Of Conformity

    Declaration of Conformity Model Number : DSR-M800 Trade Name : SANYO Responsible party : SANYO FISHER COMPANY Address : 21605 Plummer Street, Chatsworth, California 91311 Telephone No. : (818) 998-7322 This device complies with Part 15 of the FCC Rules.
  • Page 3: Main Features

    ( P. xx) Indicates manual page to refer to. Copyright This manual and software are copyrighted by Sanyo Electric Co., Ltd. Brand and product names used in this manual are the trademarks or registered trademarks of their respective companies.
  • Page 4: Table Of Contents

    e_dsr_m800.book Page 3 Friday, January 31, 2003 5:45 PM CONTENTS INTRODUCTION 1 BEFORE USE...5 Notes on handling internal hard disk drive components ...5 Do not use the digital video recorder in the following locations:...5 The hard disk and cooling fan are consumables...5 Installation conditions...5 For important recordings...5...
  • Page 5 Setting holidays...31 OTHER 1 INTERFACE SPECIFICATIONS ...44 RS-485 specifications ...44 RS-485 termination switch settings...44 DVR/VCR command table ...45 4 DISPLAY/BUZZER SET ... 32 <DISPLAY/BUZZER SET> setting items ... 32 Settings ... 33 5 SECURITY LOCK SET... 34 Password setting example ... 34 Password setting...
  • Page 6: Before Use

    e_dsr_m800.book Page 5 Friday, January 31, 2003 5:45 PM BEFORE USE Notes on handling internal hard disk drive components This unit has a built-in hard disk drive (HDD). Be sure to observe the following points carefully when operating, setting-up and servicing the unit. Do not subject the unit to shocks or vibration.
  • Page 7: Hard Disk Protection

    30 days after the power plug is disconnected. When disposing of the digital video recorder, contact a Sanyo service center for information on how to dispose of the lithium battery.
  • Page 8: Names And Functions Of Parts

    e_dsr_m800.book Page 7 Friday, January 31, 2003 5:45 PM NAMES AND FUNCTIONS OF PARTS Front panel POWER TIMER FULL (LINK/ACT.) POWER indicator Lights when the power is ON. Flashes when there is a problem with the hard disk or fan. ( P.10) [TIMER] button and indicator ( P.14) When the button is pressed while recording or stopped, the digital video recorder enters timer record standby,...
  • Page 9: Rear Panel

    e_dsr_m800.book Page 8 Friday, January 31, 2003 5:45 PM NAMES AND FUNCTIONS OF PARTS Rear panel AUDIO IN terminal AUDIO OUT terminal LAN terminal ( P.37) MIC IN terminal VIDEO IN terminal VIDEO OUT terminal TV SYSTEM selector switch Used to select the video signal between NTSC and PAL systems for the camera input and TV monitor output connected to the digital video recorder.
  • Page 10: Installation And Connections

    e_dsr_m800.book Page 9 Monday, March 10, 2003 2:21 PM INSTALLATION AND CONNECTIONS This section describes how to connect the digital video recorder to the CCTV camera and other devices. Be sure to read the instruction manuals for each connected device. Make connections carefully. Improper connections can cause smoke or malfunctions.
  • Page 11: Connecting Cables To The Control And Alarm Terminals

    The disk is checked automatically at power ON. If a hard disk problem is found, the POWER indicator flashes, and the hard disk must be replaced or reformatted. If you need to save images stored on the disk, contact a Sanyo Authorized Service Center. 1 flash per second:...
  • Page 12: Operation

    e_dsr_m800.book Page 11 Friday, January 31, 2003 5:45 PM SCREEN DISPLAY AND POSITION At power ON, the operation display area appears at the top left of the monitor screen.The operation display area shows the date/time, image quality, remaining time, and other information needed for operations.
  • Page 13: Setting The Language/Clock

    e_dsr_m800.book Page 12 Friday, January 31, 2003 5:45 PM SETTING THE LANGUAGE/CLOCK [MENU] button POWER TIMER FULL (LINK/ACT.) This section describes how to set the language displayed on the monitor and how to set the digital video recorder’s internal clock. [Settings] ( indicates initial setting.) Item...
  • Page 14: Setting The Time

    e_dsr_m800.book Page 13 Friday, January 31, 2003 5:45 PM SETTING THE LANGUAGE/CLOCK Setting the time (Initial setting: 01-01-2003 WED 00:00:00) Be sure to set the correct date and time. The digital video recorder stores the times of recordings for use in operations such as playback and search/playback.
  • Page 15: Normal Recording/Timer Recording

    e_dsr_m800.book Page 14 Friday, January 31, 2003 5:45 PM NORMAL RECORDING/TIMER RECORDING POWER TIMER indicator TIMER [TIMER] button FULL FULL indicator (LINK/ACT.) Normal recording Follow the steps below to record the monitored image onto the hard disk. Press the [REC/STOP] button. The REC indicator lights.“...
  • Page 16: Alarm Recording

    e_dsr_m800.book Page 15 Friday, January 31, 2003 5:45 PM ALARM RECORDING POWER TIMER FULL (LINK/ACT.) Alarm recording Follow the steps below to have the digital video recorder record an alarm image only when alarm input is detected during recording. Check that the cable of the device required for alarms is connected to the ALARM terminal.
  • Page 17: Normal Recording/Timer Recording Playback

    e_dsr_m800.book Page 16 Friday, January 31, 2003 5:45 PM NORMAL RECORDING/TIMER RECORDING PLAYBACK Follow the steps below to play back images recorded on the hard disk. Playback SEARCH MENU REVIEW MENU RESET Press the [ ] button. The [ ] button lights, and “ ” appears in the operation display area.
  • Page 18: Viewing Still Images

    e_dsr_m800.book Page 17 Friday, January 31, 2003 5:45 PM NORMAL RECORDING/TIMER RECORDING PLAYBACK Viewing still images SEARCH MENU REVIEW MENU RESET During playback, press the [ ] button. The image becomes a still image (freezes). appears in the operation display area. To resume playback Press the [ ] button.
  • Page 19: Searching For Recorded Images

    e_dsr_m800.book Page 18 Friday, January 31, 2003 5:45 PM SEARCHING FOR RECORDED IMAGES Images recorded on the hard disk can be searched and played back. There are two search methods available. Image to search Search in <Search> screen You can use the button operations to freeze, fast- forward or perform other operations on retrieved images being played back.
  • Page 20: Date/Time Search

    e_dsr_m800.book Page 19 Friday, January 31, 2003 5:45 PM SEARCHING FOR RECORDED IMAGES Press the [ ] or [ ] button to select the image to play back. The selected alarm image is displayed in the preview screen. You can display up to 8 alarm images. To display the next (previous) image Press the [ ] or [...
  • Page 21 e_dsr_m800.book Page 20 Friday, January 31, 2003 5:45 PM SEARCHING FOR RECORDED IMAGES Press the [ ] button, and set the date/time to search. Example: To search for the image from October 26, 2003, 8:00 PM (1) (2) (3) (4) (5) (1) Press the [ ] or [ ] button to select “10”...
  • Page 22: Preventing Accidental Operation (Key Lock Function)

    e_dsr_m800.book Page 21 Friday, January 31, 2003 5:45 PM PREVENTING ACCIDENTAL OPERATION (KEY LOCK FUNCTION) POWER TIMER FULL (LINK/ACT.) Follow the steps below to set the key lock function, preventing accidental pressing of the operation buttons. Setting the key lock function With the digital video recorder recording or stopped, press the [ button for about 3 seconds.
  • Page 23: Menu Configuration And Operations

    e_dsr_m800.book Page 22 Friday, January 31, 2003 5:45 PM MENU CONFIGURATION AND OPERATIONS This section describes the menu configuration, and which menu item to select for each operation. Displaying the menu screen and sub- menu screens [MENU] button ] button SEARCH MENU REVIEW...
  • Page 24: Overview Of Sub-Menus

    e_dsr_m800.book Page 23 Friday, January 31, 2003 5:45 PM MENU CONFIGURATION AND OPERATIONS Overview of sub-menus The screens below are the sub-menu screens displayed by selecting items from the MAIN MENU. Pressing the [MENU] button while a sub-menu screen is displayed switches the display directly to the next sub- menu screen.
  • Page 25: Language/Clock Set

    e_dsr_m800.book Page 24 Friday, January 31, 2003 5:45 PM LANGUAGE/CLOCK SET <MAIN MENU> You can perform the following functions: Change the language used to display on-screen information.* Set the date and time displayed on the normal screen.* Set the clock to adjust automatically for daylight savings time.
  • Page 26: Ext.clock Set> Settings

    “ADJUST TIME”. Press the [ ] button. “01” flashes. Press the [ ] or [ the desired time, then press the [ button. (Example: 05:00) 2nd DVR To 3rd DVR ] button to move ] button to select...
  • Page 27 e_dsr_m800.book Page 26 Friday, January 31, 2003 5:45 PM LANGUAGE/CLOCK SET Press the [EXIT/OSD] button. The display returns to the normal screen. Use the same procedure to set the <EXT.CLOCK SET> time on the second digital video recorder. When you have finished making the settings, the display returns to the normal screen.
  • Page 28: Rec Mode Set

    e_dsr_m800.book Page 27 Friday, January 31, 2003 5:45 PM REC MODE SET <MAIN MENU> <REC MODE SET> setting items [Settings] ( indicates initial setting.) Item Setting SUPER PICTURE HIGH QUALITY STANDARD AUDIO RECORDING OVER WRITE OFF* DISK FULL RESET ENABLED AL-REC ON TIMER ALARM MODE...
  • Page 29: Settings

    e_dsr_m800.book Page 28 Friday, January 31, 2003 5:45 PM REC MODE SET Settings [MENU] button ] button SEARCH MENU REVIEW MENU RESET ] button [EXIT/OSD] button Press the [MENU] button. The [MENU] button lights, and the <MAIN MENU> screen appears. Select “2.
  • Page 30: Timer Rec Set

    e_dsr_m800.book Page 29 Friday, January 31, 2003 5:45 PM TIMER REC SET <MAIN MENU> You can set recording start/stop times using the timer function. Timer setting items You can set times at which to start and stop recording on each specified day of the week. (1) WEEK Used to select the days of the week for timer settings.
  • Page 31: To Cancel All Timer Reservations

    e_dsr_m800.book Page 30 Friday, January 31, 2003 5:45 PM TIMER REC SET Press the [ ] button to move the cursor to the next item. Each time you press the [ ] button, the cursor moves to the following items: “START”...
  • Page 32: Setting Holidays

    e_dsr_m800.book Page 31 Friday, January 31, 2003 5:45 PM TIMER REC SET Press the [ ] or [ ] button to change the "STOP" time from “--:--” to “**:--”, then press the [ ] button. The “DLY” item on the 8th line automatically changes to “TUE”...
  • Page 33: Display/Buzzer Set

    QUALITY/AUDIO Don’t display picuture quality or “A” (audio recording) in operation display area. Display name set for digital video recorder. DVR NAME Don’t display name set for digital video recorder. Display current alarm count in operating display area. ALARM COUNT Don’t display current alarm count in operating display area.
  • Page 34: Settings

    e_dsr_m800.book Page 33 Friday, January 31, 2003 5:45 PM DISPLAY/BUZZER SET Settings [MENU] button ] button SEARCH MENU REVIEW EXIT/OSD MENU RESET ] button [EXIT/OSD] button Press the [MENU] button. The [MENU] button lights, and the <MAIN MENU> screen appears. Select “4.
  • Page 35: Security Lock Set

    e_dsr_m800.book Page 34 Friday, January 31, 2003 5:45 PM SECURITY LOCK SET <MAIN MENU> You can set passwords that restrict use of the digital video recorder to administrators and designated users, preventing unauthorized operation. When the security lock is set, a buzzer sounds when an unauthorized user presses any of the digital video recorder’s operation buttons.
  • Page 36: Setting The User Password

    e_dsr_m800.book Page 35 Friday, January 31, 2003 5:45 PM SECURITY LOCK SET Press the [ ] button. The first password entry bar “-” flashes. Press the [ ] and [ ] buttons to select the character to enter. Example: Selecting “1” Press the [ ] button.
  • Page 37: Setting The Authorization For Recording And Playback Operations

    e_dsr_m800.book Page 36 Friday, January 31, 2003 5:45 PM SECURITY LOCK SET When you have finished making the setting, press the [ ] button. The cursor moves to “OFF” (which flashes). Press the [ ] and [ ] buttons to select “ON”, then press the [ The cursor moves to “REC CONTROL”.
  • Page 38: Rs-485/Network Set

    e_dsr_m800.book Page 37 Friday, January 31, 2003 5:45 PM RS-485/NETWORK SET This section describes how to make the RS-485 terminal connections/settings needed to connect to an external device, and how to make the network connections needed to connect to a PC. Network connections and settings You can make digital video recorder menu settings and monitor images from a PC via a network (LAN).
  • Page 39: Connections And Settings

    The [MENU] button lights, and the <MAIN MENU> screen appears. Select “6. RS-485/NETWORK SET”, and press the [ ] button. The <NETWORK SET> screen appears. [Settings] ( indicates default setting.) Item DVR NAME IP ADDRESS REMOTE AS DATA SPEED STATUS INFO ALARM INFO FULL OUT ADDRESS* ] button...
  • Page 40: Power Failure/Used Time

    e_dsr_m800.book Page 39 Friday, January 31, 2003 5:45 PM POWER FAILURE/USED TIME <MAIN MENU> You can check the date/time of power failures and the amount of hard disk operation time. Press the [MENU] button. The [MENU] button lights, and the <MAIN MENU> screen appears.
  • Page 41: Menu Upload/Download

    e_dsr_m800.book Page 40 Friday, January 31, 2003 5:45 PM MENU UPLOAD/DOWNLOAD [MENU] button <MAIN MENU> You can save menu setting values onto a CompactFlash card. This sub-menu also lets you read menu setting values saved on CompactFlash cards. If “COPY MIRRORING SETTINGS” is set to “YES”, the hard disk may be initialized.
  • Page 42 e_dsr_m800.book Page 41 Friday, January 31, 2003 5:45 PM MENU UPLOAD/DOWNLOAD To download menu items Press the [ ] button. The <WARNING> screen appears. “NO” flashes. Press the [ ] and [ ] buttons to select “YES”, then press the [ Downloading starts.
  • Page 43: Initialize/Add Hdd

    e_dsr_m800.book Page 42 Friday, January 31, 2003 5:45 PM INITIALIZE/ADD HDD <MAIN MENU> This section discribes how to initialize the hard disk or add a hard disk. Initializing the hard disk Press the [MENU] button. The [MENU] button lights, and the <MAIN MENU> screen appears.
  • Page 44: Adding A Hard Disk (120 Gb Model Only)

    Page 43 Friday, January 31, 2003 5:45 PM INITIALIZE/ADD HDD Adding a hard disk (120 GB model only) To add a hard disk, contact a Sanyo service center. When adding a hard disk, use an add-on type hard disk unit (sold separately).
  • Page 45: Interface Specifications

    Stop bit Communication protocol A proprietary Sanyo protocol (SSP: Security Serial Protocol) is used. Use of a special controller for operation is recommended. To obtain this controller, contact a Sanyo service center. RS-485 termination switch settings Termination settings When connecting multiple devices, you must make termination settings on both end devices.
  • Page 46: Dvr/Vcr Command Table

    Page 45 Friday, January 31, 2003 5:45 PM INTERFACE SPECIFICATIONS DVR/VCR command table The table below shows the commands supported by the digital video recorder. Left digit Right digit Left digit Right digit OSD/EXIT SHIFT SHIFT REV PLAY PLAY...
  • Page 47: Specifications

    e_dsr_m800.book Page 46 Friday, January 31, 2003 5:45 PM SPECIFICATIONS Hard disk capacity Television system Picture resolution Compression Picture quality Recording type Recording speed Recording area Playback • Time/date search • Alarm search Menu language Clock settings Video input terminal Video output terminal Audio input terminal Audio output terminal...
  • Page 48: Dimensions

    e_dsr_m800.book Page 47 Friday, January 31, 2003 5:45 PM SPECIFICATIONS Dimensions (mm) POWER PLAY/ SEARCH STOP MENU REVIEW EXIT/OSD TIMER STILL MENU RESET FULL (LINK/ACT.) Front 391.5 ALARM REC/STOP LOCK/REMOTE Side...
  • Page 49 DSR-M800 DIGITAL VIDEO RECORDER WARRANTY In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
  • Page 50 05sp_backcover_dsr_m800_6.fm Page 49 Thursday, February 6, 2003 11:46 AM Printed on recycled paper SANYO Electric Co., Ltd. Imprimé sur du papier recyclé Impreso en papel reciclado 1AC6P1P2612--C L8HAC/US, US2 (0302TR-SY) Printed in Japan...

Table of Contents