General Set - Sanyo DSR-5016 Instruction Manual

4

GENERAL SET

GENERAL SET
1. DISPLAY SET
2. BUZZER SET
3. SECURITY LOCK SET
4. USER ID SET
5. RS-232C/RS-485 SET
6. HDD SET
7. NETWORK SET
8. NETWORK CONTROL SET
1. DISPLAY SET
Set conditions for the display of data on the unit's monitor by
selecting "ON" or "OFF" for each item.
1
Click the
panel.
The "MAIN MENU" is displayed.
2
Click "3. GENERAL SET".
The "GENERAL SET" screen is displayed.
3
Click "1. DISPLAY SET".
The "DISPLAY SET" screen is displayed.
DISPLAY SET
(1)
DATE
(2)
TIME
(3)
QUALITY
(4)
AUDIO
(5)
ALARM COUNT
(6)
ALARM TYPE
(7)
TITLE
5
SAVE
4
Select "ON" or "OFF" for each display
item.
Default
Item
setting
(1) DATE ON
(2) TIME ON
(3) QUALITY ON
(4) AUDIO ON
ALARM
(5) ON
COUNT
ALARM
(6) ON
TYPE
(7) TITLE ON
English
button on the operation
:
ON
:
ON
:
ON
:
ON
:
ON
:
ON
:
ON
Description
Displays the current date or
recording date.
Displays the current time or
recording time.
Displays the picture quality for
recording or playback.
Displays the audio status during
recording or playback.
Displays the number of recorded
alarms.
Displays the alarm recording type.
For alarm recording:
"ALARM" is displayed.
For pre-alarm recording:
"PRE" is displayed.
Displays the camera title.
5
Click [SAVE].
The setting is saved.
These settings apply to information displayed on the
monitor connected to the unit, not to information displayed
on the PC monitor.
2. BUZZER SET
Use the following procedure to set a warning buzzer that
sounds when an alarm occurs or when the hard disk space
reaches remaining-space warning level.
1
Click the
panel.
The "MAIN MENU" is displayed.
2
Click "3. GENERAL SET".
The "GENERAL SET" screen is displayed.
3
Click "2. BUZZER SET".
The "BUZZER SET" screen is displayed.
BUZZER SET
(1)
(2)
ALARM
DISK FULL
(3)
DISK ERROR
(4)
LOCK WARNING :
(5)
KEY IN
(6)
NON REC
5
SAVE
4
Select "ON" or "OFF" for each display
item.
Default
Item
setting
(1) ALARM OFF
DISK
(2) ON
FULL
DISK
(3) ON
ERROR
LOCK
(4) ON
WARNING
(5) KEY IN OFF
NON
(6) OFF
REC
189
button on the operation
:
OFF
:
ON
:
ON
ON
:
OFF
:
OFF
Description
Sounds a buzzer when an alarm is
detected.
Sounds a buzzer when the amount
of data stored in each of the hard
disk recording areas reaches the
remaining-space warning level
( P.182).
Sounds a buzzer when a hard-disk
error occurs.
Sounds a buzzer when a restricted
operation button is pressed during
security lock.
Specifically, the buzzer sounds
twice with an interval of
approximately 0.5 seconds.
Buzzer emits a key-operation sound
each time a button is pressed.
Sounds a buzzer when recording is
stopped.