Sanyo DSR-5016 Instruction Manual page 93

2 RECORD SET
5
Turn the jog dial to select line 9 (EXT)
and then turn the shuttle dial clockwise.
"OFF" flashes.
6
Turn the jog dial to select "OFF" and
then turn the shuttle dial clockwise.
"15" flashes.
EXT ***** *****
7
Turn the jog dial to select "5" and then
turn the shuttle dial clockwise.
"OFF" flashes.
EXT ***** *****
8
Turn the jog dial to select "ON" and
then turn the shuttle dial clockwise.
The cursor moves to line 1.
EXT ***** *****
<TIMER SET>
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 15 FPS OFF
MON --:-- --:-- OFF 15 FPS OFF
TUE --:-- --:-- OFF 15 FPS OFF
WED --:-- --:-- OFF 15 FPS OFF
THU --:-- --:-- OFF 15 FPS OFF
FRI --:-- --:-- OFF 15 FPS OFF
SAT --:-- --:-- OFF 15 FPS OFF
DLY --:-- --:-- OFF 15 FPS OFF
EXT ***** ***** OFF 15 FPS OFF
OFF 15 FPS OFF
OFF 5FPS OFF
OFF 5FPS ON
9
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
EXIT/OSD
Setting timer recording
Use the following procedure to activate or cancel timer
recording.
1
Press the [TIMER] button.
TIMER
The TIMER indicator lights up and the digital video
recorder enters timer recording standby mode.
Press the [TIMER] button once again to cancel timer
recording.
"REC" is displayed in the operation display when a signal is
received (with a pulse width of at least 1 second) via the
EXT TIMER IN terminal, and monitoring video is recorded
in the recording area.
External timer recording and normal timer recording can be
combined.
Connect the signal line from the external timer to the EXT
TIMER IN terminal. External timer recording is not possible
until a timer is connected.
92
English