Sanyo DSR-5016 Instruction Manual page 71

1 INITIAL SET
Timer period operations settings
Example 2: Setting time period operation as follows.
Automatic selection and monitor masking for "TIME
PERIOD A". (default setting)
Motion sensing for "TIME PERIOD B".
9
Turn the jog dial to select "MOTION/ROI
SENSOR" within "SELECT TIME
PERIOD" and then turn the shuttle dial
clockwise.
"TIME PERIOD A" flashes.
10
Turn the jog dial to select "TIME
PERIOD B" and then turn the shuttle
dial clockwise.
The cursor moves to "TIME PERIOD A".
11
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
EXIT/OSD
Automatic selection, masking, and motion sensors are all
set to "TIME PERIOD A" by default setting.
For the above settings, "SEQUENCE" indicates automatic
screen selection period and monitor settings ( P.128),
"MASK" indicates mask settings ( P.130), and "MOTION/
ROI SENSOR" indicates motion sensor settings ( P.99)
and ROI settings ( P.139).
<TIME PERIOD SET>
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 06:00 11:30 13:30 18:00
TIME PERIOD B 06:00 08:00 14:30 20:00
SELECT TIME PERIOD
SEQUENCE TIME PERIOD A
MASK TIME PERIOD A
MOTION/ROI SENSOR TIME PERIOD A
<TIME PERIOD SET>
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 06:00 11:30 13:30 18:00
TIME PERIOD B 06:00 08:00 14:30 20:00
SELECT TIME PERIOD
SEQUENCE TIME PERIOD A
MASK TIME PERIOD A
MOTION/ROI SENSOR TIME PERIOD B
70
English