Record Set; Recording Area Set / Normal Rec Easy Setup; Overwrite / Auto Delete - Sanyo DSR-5016 Series Quick Operation Manual

DSR-5016 series Quick Operation Guide
• RECORDING AREA SET
Select
"2. RECORDING AREA SET"
<RECORDING AREA SET>
(1)
:
TOTAL CAPACITY 2200GB
(2)
INTERNAL HDD : 600GB
: 1600GB
EXTERNAL HDD
(3)
:
RECORDING AREA 99 %
(4)
AREA FULL RESET ->
(5)
:
ARCHIVE AREA 1 %
AREA FULL RESET ->
CAUTION: WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
(1) The total capacity of the hard disk.
(2) The internal hard disk capacity.
(3) The expansion unit hard disk capacity
(will not be displayed unless an external device is connected)
(4) Sets the capacity of the recording areas.
(5) The capacity of the archive area
Select
"RECORDING AREA"
Set the recording area (Max.99%). Resetting
the area will initialize the hard disk.
When the recording area is designated by
percentage, the archive area is automatically
configured.
Archive area
Recording area Recording area Recording area
P r e s s t h e [ E X I T / O S D ] b u t t o n . T h e s e t t i n g i s c o m p l e t e d a n d t h e d i s p l a y r e t u r n s t o t h e n o r m a l s c r e e n .
Within the OSD screen, use the jog dial to display sub-menus and move the cursor. Turn the shuttle ring
clockwise to select an entry. Turning it counterclockwise will bring up the previous screen.
Press the [MENU] button.
Select the

"2. RECORD SET"

• NORMAL REC EASY SETUP
Select
"1. NORMAL REC EASY SETUP"
Select "REC RATE BASE" or
"RECORDING DURATION BASE".
When "RECORDING DURATION BASE"
selected:
<RECORDING DURATION BASE>
RECORDING DURATION : -- DAYS
TIMER RECORDING (DLY) : OFF
START --:-- STOP --:--
If further details
PICTURE QUALITY : ENHANCED
need to be set, per-
AUDIO RECORDING : OFF
form the setting
NUMBER OF CAMERAS : 2
from "4.NORMAL
REC RATE : ------FPS/CAM
REC MODE
Select desired value for the
"RECORDING DURATION".
TIMER ON/OFF When the timer is ON, set the time.
Setting "PICTURE QUALITY" and
"AUDIO RECORDING"
Turn the shuttle ring counterclockwise until
the warning screen is displayed.
Select "Yes" and return to
"1.NORMAL REC EASY SETUP" screen.
<RECORD SET>
1.NORMAL REC EASY SETUP
2.RECORDING AREA SET
3.RECORDING CONDITIONS SET ->
4.NORMAL REC MODE SET
5.PROGRAM REC SET
6.TIMER SET ->
7.ALARM REC MODE SET
8.ALARM OPERATION SET
MOVE:JOG SELECT:SHUTTLE
• OVERWRITE
Select "3. RECORDING CONDITIONS SET"
<RECORDING CONDITIONS SET>
RECORDING AREA
OVERWRITE
ARCHIVE AREA
is
MODE
REMAINING DISK WARNING : **
AUTO DELETE
Select "ON" for "OVERWRITE".
SET".
OFF: Recording is stopped when
the normal recording area becomes
full.
ON: Overwriting automatically starts
from the beginning of the recording
area when it becomes full.
Overwriting is activated
in the recording area.
Record set
->
->
->
->
->
->
• AUTO DELETE
: ON
: MANUAL COPY
: OFF
Select "AUTO DELETE".
Set the storage period for recorded
data to "OFF" or within the range of
"1 DAY to 99 DAYS" (full days).
5