Error Report - Kyocera FS-2020D Operation Manual

>Emulation
? PCL 6
>Emulation
? KPDL (AUTO)
>>Error Report
? On
>Emulation
? PCL 6
>Emulation
KC-GL
>>Pen(1) Width
?
7-40
Error Report (Printing KPDL errors)
The printer can print error descriptions when printing error occurs during
KPDL emulation. The default is On — the printer prints KPDL errors.
1
Press
2
Press
3
Press [OK]. A blinking question mark (?) appears.
4
Select KPDL or KPDL (AUTO) using
>
5
Press
6
Press [OK]. A blinking question mark (?) appears.
7
Select On or Off using
8
Press [MENU]. The display returns to Ready.
Selecting KC-GL Pen Width (FS-6970DN only)
The KC-GL emulation mode enables you to set the pen widths in dots,
for pen numbers 1 to 8.
1
Press
2
Press
3
Press [OK]. A blinking question mark (?) appears.
4
Select KC-GL using
>
5
Press
until the desired pen number of 1 to 8 is displayed.
6
Press [OK]. A blinking question mark (?) appears at the last digit.
01 dot(s)
7
Press
cursor. Use
8
Press [OK].
Procced to next subsection to select the KC-GL page size.
Selecting KC-GL Page Set
The KC-GL emulation mode also enables you to set the KC-GL page
size.
1
Press
2
Press
while Print Settings > is displayed.
or repeatedly until >Emulation > appears.
. >>Error Report appears.
or . Press [OK].
while Print Settings > is displayed.
or repeatedly until >Emulation > appears.
or .
. >>Pen(1) Width appears. Press
or to increase or decrease the value at the blinking
and to move the cursor right and left.
while >>Pen(X) Width is displayed.
or repeatedly until >>KC-GL Page Set appears.
or . Press [OK].
or repeatedly
Using the Operation Panel