Custom Paper Size - Kyocera FS-2020D Operation Manual

>Cassette Size >
? Custom
7-30

Custom Paper Size

If you use a non-standard size paper, load the paper and select the
paper size dial to OTHER (refer to the Loading Paper section in the
Operation Guide).
Setting the Paper Size from the Operation Panel
Use the operation panel to set the size of paper loaded in the cassette
on the printer. This menu appears if the size dial for the cassette is set to
Other.
1
Press while Paper Settings > is displayed.
2
Press or repeatedly until >Cassette Size > appears.
If optional paper feeders are added, Cassette1 Size will appear
for the standard paper cassette and Cassette2 Size, Cassette3
Size (FS-3920DN/FS-4020DN/FS-6970DN), Cassette4 Size
(FS-3920DN/FS-4020DN//FS-6970DN) and Cassette5 Size (FS-
6970DN) will appear for the optional paper feeders.
3
Press [OK]. A blinking question mark (?) appears.
4
Press or to display the desired paper size. The message
display toggles through the following paper sizes:
For FS-2020D/3920DN/4020DN
Envelope C5
A6 (FS-3920DN/FS-4020DN only)
A5
B5
ISO B5
A4
Executive
Letter
Legal
Custom
Oficio II
Folio
16K
5
When the desired paper size is displayed, press [OK]. The paper
size is set for the paper cassette.
If you selected Custom in step 4, be sure to set the unit of
measurement and the dimensions of the paper as described in the
following sections.
Select the units of measurement as described in the next section.
For FS-6970DN
Envelope C5
A5-R
A5 (Cassette 1 only)
B5
ISO B5
A4-R
A4
Executive
Letter-R
Letter
Legal
A3
B4
Ledger
Custom
Enfvelope C4
Oficio II
Folio
16K
Using the Operation Panel