Using The Menu Selection System - Kyocera FS-2020D Operation Manual

7-8

Using the Menu Selection System

Menu Selection System
This section explains how to use the menu selection system. [MENU] on
the operation panel allows you to use the menu to configure the printer
settings to your specific needs. Settings can be made when Ready,
Please wait, Sleeping or Processing is indicated on the printer
message display.
Note Settings that are received from application software and the
printer driver will take priority over settings made in the operation
panel.
Entering the Mode Selection Menu
Press [MENU] when Ready, Please wait, Sleeping or
Processing is indicated on the printer message display.
The mode selection menu is displayed.
IMPORTANT Job Box is displayed in the selection menu when
the hard disk or RAM Disk is installed. For more information, refer
to Job Box on page 7-19 or RAM Disk Mode (Using the RAM
disk) on page 7-58.
Using the Operation Panel