Kyocera FS-2020D Operation Manual page 178

>>Maximum Output
>>Reset Counter?
7-78
Maximum Output (Maximum print output setting)
Limits the number of pages for all printing on the currently selected
account.
1
Set the account ID and then press
>>Maximum Output appears.
2
Press [OK]. The message display shows a blinking cursor (_).
0000001
3
Press
blinking cursor. Set the desired number of pages. You can set a
number between 0000001 and 9999999 as the number of pages.
Use
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
Reset Counter (Counter reset)
Resets the counter (pages used) for the currently selected account.
1
Set the account ID and then press
Counter appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Press [OK] again. The counter is reset.
4
Press [MENU]. The display returns to Ready.
or to increase or decrease, respectively, the value at the
and to move the cursor right and left.
or repeatedly until
or repeatedly until >>Reset
Using the Operation Panel