Kyocera FS-2020D Operation Manual page 127

>MP Tray Size
? A4
Using the Operation Panel
MP Tray Size (Setting MP tray paper size)
When you use the MP tray, you should set the MP tray size to the paper
size that is used to format the job to print. If the sizes do not match,
printing will not be performed on the correct size paper.
The default setting is Letter size for the U.S. and Canada and A4 for
other countries. For more information about the paper sizes that you can
feed from the MP tray, refer to Paper Specifications on page 2-2.
Note Feeding the paper having a paper size which does not
match the current paper size from the MP tray can cause paper
jam.
1
Press while Paper Settings > is displayed.
2
Press or repeatedly until >MP Tray Size appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Press or to display the desired paper size. The message
display toggles through the following paper sizes:
For FS-2020D/3920DN/4020DN
Env. Monarch
Envelope #10
Envelope #9
Envelope #6
Envelope DL
Envelope C5
A6
B6
A5
B5
ISO B5
A4
Executive
Letter
Legal
Custom
Oficio II
Statement
Folio
Youkei 2
Youkei 4
16K
Hagaki
OufukuHagaki
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
For FS-6970DN
Env. Monarch
Envelope #10
Envelope #9
Envelope #6
Envelope DL
Envelope C5
A6
B6
A5-R
B5
ISO B5
A4-R
A4
Executive
Letter-R
Letter
Legal
A3
B4
Ledger
Custom
Envelope C4
Oficio II
Statement
Folio
Youkei 2
Youkei 4
8K
16K
Hagaki
OufukuHagaki
7-27