Device Common (Selecting/Setting The Common Device) - Kyocera FS-2020D Operation Manual

Device Common
>MSG Language
? English
Using the Operation Panel
Device Common (Selecting/Setting the
common device)
Selects/sets all the functions in this printer.
The options available in Device Common are as follows:
• MSG Language (Selecting the message language)
• Buzzer (Alarm (Buzzer) setting)
• RAM Disk Mode (Using the RAM disk)
• Hard Disk (Using the optional hard disk)
• Memory Card (Using the memory card)
• Error Handling (Error detection setting)
• Timer (Timer setting)
The Hard Disk and Memory Card menu are only
Note
displayed when a hard disk and CF card are installed in the
printer .
1
Press [MENU].
2
Press or
>
MSG Language (Selecting the message language)
You can select the language of the message display by following the
procedure given below
languages. Contact your service technician for information.
1
Press while Device Common > is displayed.
2
Press or
default message language is English.
3
To change the language, press [OK]. A blinking question mark (?)
appears.
4
Press or . The display cycles through the available selection in
the following order:
English
Français
Deutsch
Italiano
Nederlands
Español
Русский
Português
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
repeatedly until Device Common > appears.
.
You can optionally download messages in other
repeatedly until >MSG Language appears. The
7-55