Error Report - Kyocera FS-C5100DN Advanced Operation Manual

>Emulation
? KPDL (AUTO)
>Emulation
? PCL 6
>Emulation
? KPDL (AUTO)
>>Error Report
? On
Using the Operation Panel
Emulation (Setting the emulation)
You can change the emulation mode for the current interface. Use the
procedure below to select the mode.
1
Press while Print Settings > is displayed.
2
Press or
message display. One of the emulation modes appears, indicating
the emulation currently in use.
3
Press [OK]. A blinking question mark (?) appears.
4
Press or
displayed.
PCL 6
KPDL
KPDL (AUTO)(default)
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
Error Report (Printing KPDL errors)
The printer can print error descriptions when printing error occurs during
KPDL emulation. The default is On — the printer does not print KPDL
errors.
1
Press while Print Settings > is displayed.
2
Press or
3
Press [OK]. A blinking question mark (?) appears.
4
Select KPDL or KPDL (AUTO) using
>
5
Press . >>Error Report appears.
6
Press [OK]. A blinking question mark (?) appears.
7
Select On or Off using
8
Press [MENU]. The display returns to Ready.
repeatedly until >Emulation > appears on the
repeatedly until the desired emulation mode is
repeatedly until >Emulation > appears.
or . Press [OK].
or . Press [OK].
2-43