Kyocera FS-2020D Operation Manual page 93

Troubleshooting
RAM Disk Errors
Code Meaning
Format error. Try turning the power off and on again.
01
RAM disk mode is Off. Turn RAM disk mode On from the operation panel.
02
No disk space. Purge unnecessary files.
04
Specified file is not on disk.
05
Insufficient printer memory to support the RAM disk system. Expand printer
06
memory.
Ready, Data, and Attention Indicators
The following indicators light during normal operation and whenever the
printer needs attention. Depending on the status of lighting, each
indicator has the following meaning:
Indicator Description
Flashing. Indicates an error that you can resolve. Refer to
Error Messages on page 6-5.
On. Indicates that the printer is ready. The printer prints the
data it receives.
Off. [Cancel] was pressed during Ready is displayed. Data
can be received but will not be printed. To resume printing,
press [Cancel] again.
Printing is cancelling.
Also, indicates when paper jam occurred, toner has run
out, cover is open, and so on.
Flashing. Indicates that a data is being received.
On. Indicates either that data received is being processed
before printing starts, or that data received is being written
to or read from a CompactFlash card, hard disk, RAM disk,
or USB flash memory.
Flashing. Indicates that the printer is ready to print when
Please wait is displayed. Also indicates that the
corresponding paper cassette is not installed. Indicates that
the printer requires maintenance such as adding paper,
cleaning the printer, replacement of maintenance kit,
preparing the toner container, formatting of hard disk and
CF card.
On. Indicates when paper jam occurred, toner has run out,
cover is open, and so on. If the message includes Press
GO, press [GO] to resume printing.
The ID or Password entered for the Security, Administrator,
or Job Accounting function is not correct. Check the ID or
Password, and enter the correct ID or password.
6-11