Kyocera FS-2020D Operation Manual page 169

>>USB Device
? Unblock
>>Parallel I/F
? Unblock
>>Option I/F
? Unblock
Using the Operation Panel
USB Device (USB interface setting)
This locks and protects the USB interface. The default setting is
Unblock.
1
Press while >I/F Block > is displayed. >>USB Device
appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Select Block or Unblock using
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
Parallel I/F (Parallel interface setting)
This locks and protects the parallel interface. The default setting is
Unblock.
1
Press while >I/F Block > is displayed. >>Parallel I/F
appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Select Block or Unblock using
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
Option I/F (Network interface card setting)
This locks and protects the network interface card (NIC). The default
setting is Unblock.
Note Option I/F is displayed only when the optional network
interface is installed on the printer.
1
Press while >I/F Block > is displayed. >>Option I/F
appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Select Block or Unblock using
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
or .
or .
or .
7-69