Kyocera FS-2020D Operation Manual page 128

>MP Tray Type
? PLAIN
7-28
MP Tray Type (Setting the MP tray paper type)
You can use this to set the paper type that can be supplied from the MP
tray. The default setting is PLAIN.
For more information about paper types that you can feed from the MP
tray, refer to Paper Specifications on page 2-2.
1
Press while Paper Settings > is displayed.
2
Press or repeatedly until >MP Tray Type appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Press or to display the desired paper type. The message
display toggles through the following paper types:
PLAIN
TRANSPARENCY
PREPRINTED
LABELS
BOND
RECYCLED
VELLUM
ROUGH
LETTERHEAD
COLOR
PREPUNCHED
ENVELOPE
CARDSTOCK
THICK
HIGH QUALITY
CUSTOM 1 (to 8)
Note You can define any paper type and store that definition
in the printer. For more information, refer to Type Adjust
(Creating custom paper type) on page 7-33.
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
Using the Operation Panel