Using The Menu Selection System - Kyocera FS-C5100DN Advanced Operation Manual

2-8

Using the Menu Selection System

Menu Selection System
This section explains how to use the menu selection system.
[MENU] on the operation panel allows you to use the menu to configure
the printer settings to your specific needs. Settings can be made when
Ready is indicated on the printer message display.
Note Settings that are received from application software and
the printer driver will take priority over settings made in the
operation panel.
Entering the Mode Selection Menu
Press [MENU] when Ready is indicated on the printer message display.
The mode selection menu is displayed.
IMPORTANT The Custom Box option appears in the mode selection
menu when the hard disk is installed. The Job Box option appears
when the hard disk is installed or the RAM disk has been set up.
For more information, please refer to Custom Box (Using a Custom
Box) on page 2-19, Job Box on page 2-23 or RAM Disk Mode (Using
the RAM disk) on page 2-56.
Using the Operation Panel