2.
Remove the paper from the tray.
3.
If the paper is torn, remove the tray completely and check inside the printer for torn pieces of paper.
4.
Reload the tray with undamaged paper, then push the tray in until it stops.
5.
On the printer touch screen, touch Confirm.
Clearing Paper Jams from Tray 5 (Bypass Tray)
1.
Remove the jammed paper from the tray. Make sure there are no sheets of paper in the paper
feed entrance area where the tray connects to the printer.
2.
If the paper is torn, check inside the printer for torn pieces of paper.
3.
Reload the tray with undamaged paper. The leading edge of the paper should lightly touch the
paper feed entrance.
4.
Touch Confirm on the printer touch screen.
wc7120-080
wc7120-081
wc7120-082
WorkCentre 7120 Multifunction Printer
Troubleshooting
181
User Guide