Turning Off The Camera; Turning On The Camera When It Is In The Sleep Mode - Panasonic Viera Link HX-WA10 Owner's Manual

Turning off the camera

1
Press the power button for at least 1 second.
h The camera turns off.
h If you briefly press the power button, once, the camera will switch to
the sleep mode.
Turning on the camera when it is in the sleep
mode
In order to preserve battery pack power, the ECONOMY function operates to
automatically turn off the camera (sleep mode) after about 5 minutes of no
use during shooting, or about 5 minutes of no use during playback (factory-
preset settings).
i When the camera is in the sleep mode, it turns on when the monitor unit is
opened or one of the camera's buttons is pressed.
i When the AC adaptor is connected, the ECONOMY mode will become
active about 5 minutes after the camera is turned on (factory-preset
setting).
i The user can specify the time elapsed before the sleep mode is activated
(page 117).
HINT
About the standby mode
i The camera goes into the standby mode if you close the monitor unit, or if
you leave it in the sleep mode for about 1 hour. The standby mode uses
almost no power.
i Open the monitor unit, or press the power button briefly, and the camera
turns on immediately and you are ready to shoot or view images without
any delay. Use the standby mode to turn off the camera only briefly, or if
you want to be able to use it immediately.
i If you close the monitor unit while recording a video, recording stops and
the camera switches to the standby mode.
43
VQT3P35