Rewrite Adjustment Data; How To Rewrite Adjustment Data On Camera C.b.a; How To Rewrite Adjustment Data On Vtr C.b.a; How To Change The Eeprom Data - Panasonic AG-DVC30P Service Manual

4-3. REWRITE Adjustment Data

4-3-1. How to Rewrite Adjustment data on Camera C.B.A.

1. Select "Camera Check menu" In the Main menu, and then press the "Enter" key.
2. Select "3. Read (Save) / Write All EEPROM datas" in the Camera check menu, and then press the "Enter"
key.
3. Select "10. Data write using stored file" in "3. Read (Save) / Write All EEPROM datas" menu, and then
press the "Enter" key.
4. Type the saved file name, and then press the "Enter" key.
5. Select "9. EEPROM ALL (2 Kbyte)", and then press the "Enter" key.
6. The adjustment data will be written in EEPROM (IC3006).

4-3-2. How to Rewrite Adjustment data on VTR C.B.A.

1. Select "Video Check menu" In the Main menu, and then press the "Enter" key.
2. Select "3. Read (Save) / Write All EEPROM datas" in the Video check menu, and then press the "Enter" key.
3. Select "6. Writing from the stored data files" in the "3. Read (Save) / Write All EEPROM datas" menu, and
then press "Enter" key.
4. Type the saved file name, and then press the "Enter" key.
5. Select "5. Write EEPROM (1024 byte)", and then press the "Enter" key.
6. The adjustment data can be written in EEPROM (IC2008).

4-4. How to change the EEPROM Data.

EEPROM data can be changed individuality address unit. When changing EEPROM data with this EVR software, it
uses item "2. EEPROM/RAM Editor" of each check menu.
NOTE: Before changing the Camera or VTR EEPROM data, be sure to save ALL EEPROM data into the personal
computer to avoid any accidental data loss. Regarding the saving method, refer to item 4-1 and 4-2 in this
section.

4-4-1. How to change the CAMERA EEPROM data.

1. Boot up EVR software and open the Camera check menu.
2. Select "2. EEPROM/RAM Editor" and press "ENTER" key.
ELE-13