Pc Evr (Adjustment) Software; Boot Up The Adjustment Software - Panasonic AG-DVC30P Service Manual

3. PC EVR (ADJUSTMENT) SOFTWARE

3-1. BOOT UP THE ADJUSTMENT SOFTWARE

1. Copy all files of EVR software (VFK1908:NTSC / VFK1909:PAL) to created directly on PC.
2. Restart the PC in DOS mode.
3. In case NTSC software, type "dvc30p" and press ENTER key, then EVR software boot up.
In case PAL software, type "dvc30e" and press ENTER key, then EVR software boot up.
4. Wait for a few seconds so that the EVR adjustment program is started.
NOTE:
In case of communication
error occurred in
mode, please try to boot an
EVR software in MS-DOS
WINDOWS screen.
In case of select No.1
ELE-5
PRESS ENTER KEY
PRESS ENTER KEY
DOS
Normally this screen is appears. We
recommended storing the EEPROM
data before starting adjustment. If you
want to skip storing the data, PRESS
ESC KEY, then go storing to Main
menu.
NOTE: It is only adjustment data that
is actually saved.