9. DIAG-MENU Display
9-1. Version Display Operation for CAMERA software
1.
Hold down the "MENU" button for 3 second or more to open the MAIN menu.
2.
Select the "MAINTENANCE" and press the "JOG DIAL" button to open this page.
3.
Select "DIAGNOSTIC" and press the "JOG DIAL" button to open this page.
< DIAGNOSTIC >
CAMSOFT(IN)
CAMSOFT(OUT)
CAM TABLE
FONT ROM
PLD(CHAR)
PLD(MEM)
PLD(TG)
9-2. Version Display Operation for VTR software and Hour Meter Display
1.
Hold down the "MENU" button for 3 second or more to open the MAIN menu.
2.
Select the "VTR MENU" and press the "JOG DIAL" button to open this page.
3.
Select "VTR DIAG" and press the "JOG DIAL" button to open this page.
< VTR DIAG >
OPERATION
DRUM RUNNING
THREADING
DRUM RUNNING r
THREADING r
VTR SYSCON
SERVO
FRONT
VIDEO FPGA
PRE PROCESS FPGA
1.00-00-0.00
1.11-00-0.00
p1.01-00-0.00
p1.00-00-0.00
p1.00-00-0.00
p0.10-00-2.20
p0.21-00-2.34
00000 X10h
00000 X10h
00000
00000 X10h
00000
1.07-00-0.00
p1.02-00-0.00
1.00-00-0.00
p0.33-00-0.00
0.00-63-0.16
INF-12
Micro Computer on Camera System control
Camera System Control (FLASH-ROM)
GAMMA/KNEE data table
Font data for on-screen character
CHARA FPGA (CAM DSP board)
FM FPGA (CAM DSP board)
TG FPGA (TG board)
Total power on time (10 times)
Total cylinder motor running time.
Total loading and unloading times
Cylinder Motor running time.
Loading and Unloading times (Resetable)
Version of VTR System Control microcomputer
Version of SERVO microcomputer
Version of AUDIO LCD microcomputer
Version of VIDEO FPGA (PLD) software
Version of PRE PROCESS FPGA (PLD) software
(10 times)
(10 times) (Resetable)