Removing And Installing Glove Compartment Light W6 - Volkswagen Jetta 2005 Workshop Manual

2.2 Removing and installing glove compart‐
ment light -W6-
Special tools and workshop equipment required
♦ Removal wedge -VAS 3409-
Note
When removing and installing components in visual area (con‐
nectors, covers, trims etc.) apply a commercial adhesive tape
where a lever tool is applied ( removal wedge -VAS 3409- , srew‐
driver).
Removing:
– Switch off the ignition and all electrical consumers.
– Lever lens carefully out using removal wedge -VAS 3409- or
a screwdriver.
– Disconnect connector -arrow-.
Renew bulb:
Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
2. Lights and switches in dash panel
241