Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
6.4.1
Removing and installing rear interior
and reading light (vehicles with ATAS)
Note
If a rear interior and reading light is removed, the ATAS must
♦
be deactivated
⇒ page 277
The switches -1- of the reading lights are integrated in the rear
♦
interior and reading light and cannot be renewed separately.
The anti-theft alarm ultrasonic sensor -G209- -2- cannot be
♦
renewed separately.
The anti-theft alarm ultrasonic sensor -G209- , comprising four
♦
individual sensors -2-, leads and a control element on the back
of the interior and reading light, must not be moved from its
predefined position.
Removing:
– Switch off the ignition and all electrical consumers.
– Pull the entire complete trim -1- (including lens and reflectors)
-arrows- vertically downwards and out from the interior and
reading light.
– Press both locking tabs -2- in -direction of arrow A- and take
the complete interior and reading light -1- in
-direction of arrow B- off the headliner.
– Unlock connectors -1- and -2- and pull both connectors off.
Installing:
Install in reverse order of removal.
268
Rep. Gr.96 - Lights, lamps, switches - inside
.