Volkswagen Jetta 2005 Workshop Manual page 240

Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
– Insert ignition key in lock cylinder and turn to position "Drive".
Note
Insert ignition key in lock cylinder and turn to position "Drive".
Position of key in lock cylinder:
1 - Position "Stop"
2 - Position "Drive"
3 - Position "Start"
– Install all parts in reverse order of removal.
10.3.1 Removing and installing ignition key
withdrawal lock solenoid -N334-
The ignition key withdrawal lock solenoid -N334- is located di‐
rectly adjacent to the ignition starter key.
Note
To remove ignition key on vehicles with an automatic gearbox,
always move selector lever to position "P" first then switch off ig‐
nition. Otherwise the ignition key withdrawal lock solenoid -N334-
will inhibit the removal of the ignition key.
Removing:
– Remove steering column electronics control unit -J527-
⇒ page 221 .
– Release locking device -2- using a screwdriver.
– Pull ignition key withdrawal lock solenoid -N334- -1- in direc‐
tion of arrow and out of its mounting.
– The electrical connection will be disconnected automatically.
Installing:
– Installation is performed in the reverse order of installation;
when doing this, note the following:
Note
After reconnecting the battery, carry out final control diagnosis to
activate ignition key withdrawal lock solenoid -N334-
⇒ page 227 .
232
Rep. Gr.94 - Lights, lamps, switches - outside