– Pull engine cover off upwards -arrows-.
– Disconnect connector of DF wiring -1- and pull protective cap
-2- off.
– Unscrew B+ wiring -arrow- off alternator.
Caution
Mark top and direction of rotation of poly V-belt before remov‐
ing. When installing observe direction of rotation marked on
removal. Installing opposite to the direction of rotation leads to
belt damage!
– Mark direction of rotation of poly V-belt.
– Release poly V-belt by turning the tensioning device with an
open-ended spanner AF 16 in -direction of arrow-.
– Lock tensioning element with retaining pin -T10060 A- .
– Remove ribbed belt.
Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
101
9. Alternator