– Drive threaded sleeves -A- out of the alternator housing for
approx. 4 mm in -direction of arrow-.
– Position wiring bracket -arrow- on rear of generator at 9
o'clock.
Note
All hoses of the charge air system are secured with hose clips
♦
or with quick release couplings. When using quick release
couplings the following points must be observed:
Fit hose/tube without assistance of tools.
♦
Check for secure fit of the lugs -arrow-.
♦
– Tighten threaded connections to specified torque settings
⇒ page 145
.
Caution
Observe instructions on connecting battery terminals
⇒ page 4
.
– Connect the battery
– Start the engine and check belt running.
– Switch off the engine.
⇒ page 29
.
Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
131
9. Alternator