Volkswagen Jetta 2005 Workshop Manual page 232

Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
9.2.3 Removing and installing steering angle
sensor -G85-
Removing:
– Pull the steering angle sender -G85- -1- backwards and away
from the steering column switch -arrow-.
Installing:
Install in reverse order of removal.
9.2.4 Removing and installing turn signal
switch
Note
The "turn signal switch" comprises of the following compo‐
♦
nents turn signal switch -E2- , headlight dipper/flasher switch
-E4- and, if fitted with cruise control system cruise control sys‐
tem switch -E45-
For reasons of clarity, the steering column switch is shown with
♦
cruise control system switch -E45- .
Removing:
– Release retaining clips -arrows- using a 1.0 mm feeler gauge
-1- and take "turn signal switch" off backwards.
Installing:
Installation is performed in the reverse order of installation; when
doing this, note the following:
Note
The "turn signal switch" should be heard to engage.
224
Rep. Gr.94 - Lights, lamps, switches - outside