Volkswagen Jetta 2005 Workshop Manual page 144

Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
– Lock tensioning element with retaining pin -T10060 A- .
– Remove ribbed belt.
– Remove alternator securing bolts -arrows-.
– Unscrew wiring bracket -arrow- from alternator.
– Remove alternator.
Installing:
Installation is carried out in the reverse order. When installing,
note the following:
Caution
♦ When reinstalling used ribbed belts (poly V-belts) observe
the direction of rotation marked on removal!
♦ Ensure, before installing ribbed belt, that all ancillaries (al‐
ternator, air conditioner compressor) are secured tightly.
♦ Ensure ribbed belt (poly V-belt) is seated correctly in belt
pulley when installing.
– Drive threaded sleeves -A- out of the alternator housing for
approx. 4 mm in -direction of arrow-.
136
Rep. Gr.27 - Starter, current supply, CC