♦ Torque screwdriver -V.A.G 1624-
Removing:
– Remove alternator.
– Remove securing bolt and nuts -arrows- and take protective
cap off alternator.
– Remove securing bolts for voltage regulator -arrows-.
– Remove voltage regulator from alternator.
Installing:
Install in reverse order of removal.
– Tighten threaded connections to specified torque settings
⇒ page 145
.
9.12.2
Removing and installing voltage regula‐
tor, manufacturer: Valeo
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1783/-
Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
143
9. Alternator