Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
♦ Removal wedge -VAS 3409-
Note
When removing and installing components in visual area (con‐
♦
nectors, covers, trims etc.) apply a commercial adhesive tape
where a lever tool is applied ( removal wedge -VAS 3409- ,
srewdriver).
The removal and installation of both lights is the same so that
♦
only one light is described.
Removing:
– Switch off the ignition and all electrical consumers.
– Lever light carefully out of the roof trim using removal wedge
-VAS 3409- or a screwdriver.
– Disconnect connector -arrow-.
Renew bulb:
270
Rep. Gr.96 - Lights, lamps, switches - inside