♦ Removal wedge -VAS 3409-
Note
When removing and installing components in visual area (con‐
♦
nectors, covers, trims etc.) apply a commercial adhesive tape
where a lever tool is applied ( removal wedge -VAS 3409- ,
srewdriver).
The removal and installation of both footwell lights is the same
♦
so that only one light is described.
Removing:
– Switch off the ignition and all electrical consumers.
– Lever footwell light out of the trim under the dash panel using
removal wedge -VAS 3409- or a screwdriver.
– Disconnect connector -arrow-.
Renew bulb:
Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
2. Lights and switches in dash panel
245