Volkswagen Jetta 2005 Workshop Manual page 132

Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
– Unscrew B+ wiring -arrow- off alternator.
Caution
Mark top and direction of rotation of poly V-belt before remov‐
ing. When installing observe direction of rotation marked on
removal. Installing opposite to the direction of rotation leads to
belt damage!
– Remove upper and lower idler roller and tensioning roller for
alternator poly V-belt, and coolant pump ⇒ Rep. Gr. 13
– Remove alternator securing bolts -arrows-.
– Unscrew wiring bracket from alternator -arrow-.
– Take alternator out upwards.
Installing:
Installation is carried out in the reverse order. When installing,
note the following:
Caution
♦ When reinstalling used ribbed belts (poly V-belts) observe
the direction of rotation marked on removal!
♦ Ensure, before installing ribbed belt, that all ancillaries (al‐
ternator, air conditioner compressor) are secured tightly.
♦ Ensure ribbed belt (poly V-belt) is seated correctly in belt
pulley when installing.
– Drive threaded sleeves -A- out of the alternator housing for
approx. 4 mm in direction of arrow.
124
Rep. Gr.27 - Starter, current supply, CC