Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
8
Horn
8.1
Removing and installing treble tone horn
-H2- and bass tone horn -H7-
Note
The treble tone horn -H2- and the bass tone horn -H7- are
♦
controlled in parallel from the onboard supply control unit -
J519- .
The procedure for removal and installation of treble tone horn
♦
-H2- and bass tone horn -H7- is the same and is therefore
described for just one horn.
The horns are installed to the left and the right of the longitu‐
♦
dinal members.
Removing:
– Switch off the ignition and all electrical consumers.
– Remove front bumper ⇒ General body repairs; Rep. Gr. 63 ;
Front bumper
– Disconnect connector -arrow-.
– Unscrew securing bolt -arrow- and remove horn.
Installing:
Install in reverse order of removal.
8.2
Checking treble tone horn -H2- and bass
tone horn -H7-
The horns ( treble tone horn -H2- and bass tone horn -H7- ) can
be checked using final control diagnosis from the onboard supply
control unit -J519- .
274
Rep. Gr.96 - Lights, lamps, switches - inside