Volkswagen Jetta 2005 Workshop Manual page 80

Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
– Remove lower securing bolt of starter -arrow-.
– Remove starter from vehicle upwards.
Installing:
Installation is carried out in the reverse order. When installing,
note the following:
– Tighten threaded connections to specified torque settings
⇒ page 97 .
7.3.5 Vehicles with 2,0 l TDI engine
Special tools and workshop
equipment required
♦ Torque wrench -V.A.G
1331-
♦ Torque wrench -V.A.G
1332-
♦ Spring-type clip pliers -VAS
5024-
Removing:
– Disconnect the battery
72
Rep. Gr.27 - Starter, current supply, CC
⇒ page 29 .