Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
– Pull off cover cap -1-.
– Pull off multi-pin connector -2-.
– Press spring retaining clip -2- in -direction of arrow- under the
locking lugs-1- and fold spring retaining clip -2- upwards.
– Take headlight main beam bulb -1- out of the headlight.
Installing:
Note
When installing cap, ensure that it is seated correctly. The in‐
♦
gress of water will lead to permanent damage of the headlight.
Do not touch bulb glass when fitting bulbs. Fingers leave
♦
traces of grease on the glass, which evaporate when the bulb
is switched on and cause the glass to cloud over.
Installation is performed in the reverse order of installation; when
doing this, note the following:
186
Rep. Gr.94 - Lights, lamps, switches - outside